| HOME PAGE
HOW THE L.P.G SYSTEM WORKS
JAGUAR XJ8 CONVERSION
AUDI A6 CONVERSION
OTHER CONVERSIONS
BOOK A FREE DEMONSTRATION AND TEST DRIVE
ABOUT THE L.P.G.A APPROVAL SCHEME
CONTACT US
ULTRA SEAL PUNCTURE PREVENTION
OTHER INTERESTING SITES
Catalog Page
|
|
|
STOP PUNCTURES BEFORE THEY STOP YOU!
Here at Shardlow Autogas we have had a bit of a dilemma when fitting gas tanks in the spare wheel well of a vehicle. Where on earth do you put the spare wheel??
After trying many products on the market ,we came across Ultra Seal.
There is now no need to carry a spare wheel.Ultra Seal stops punctures before they stop you!
A single Ultra Seal treatment will also :-
Control under inflation
Improve fuel economy
Make the inner tyre cooler
Extend tyre life
Control most blowouts
Preserve tyre casings
PRICES START FROM 25pounds FOR COMPLETE PUNCTURE PROTECTION AND PIECE OF MIND
|
Ultra Seal is guaranteed to stop porosity leaks,air migration and punctures up to 6mm in diameter within the tyre tread areafor the legal life of the tyre.If the tyre casing is damaged our weakened to a point of being unsafe,the Ultra Seal formulation has been designed to slowly bleed regardless of how small the damage may be.Ultra Seal is an intelligent thinking product ,that uses its own initiative where safety is concerned
|
|
Never worry about getting a puncture again!
Once the initial driving/usage period has been attained (3 to 5 miles), Ultraseal will be thoroughly distributed throughout the entire inner surface of the tyre/wheel assembly. Ultraseal lays a 50 thousandths of an inch coating (0.50) which has the ability to remain suspended on to the tyre/rim assembly's entire inner air cavity, .
Thixogel is the proprietary attribute that prevents Ultraseal's formulation from separating and/or migrating to the tread area.
Ultraseal is a liquid coating that conditions the inner surface and eliminates porosity and bead leaks as minute amounts of air attempt to escape. Ultraseal continuously stands on guard to protect tyres against air loss from punctures for the tyre's legal tread life.
When a tyre is punctured, Ultraseal is forced against and around the puncturing object by the inner air pressure, thereby preventing air from escaping.
If the puncturing object is thrown out of the tyre by centrifugal force or is pulled out, the inside air forces Ultraseal into the wound and immediately stops air loss. Special fibres entwine, forming a clot, then as the rubber recovers (see rubber recovery), aided by the flexing of the rotating tyre, the inner air pressure forces the clot well into and through the wound.
Once Ultraseal is exposed to outside air, a unique chemical curing process begins. The clot extends well into and through the wound and once cured provides a seal that is impervious to water (rain, snow, mud, etc.).
The cured clot, is then transposed into a positive rubberised seal, thereby protecting the inner casing and steel belts by preventing outside contaminants from leaching into the wound.
|
|
CLICK HERE FOR THE ULTRA SEAL WEBSITE
|
THE ULTRA SEAL RANGE
|
|
|
|
